2018 installation guide of explosion proof lights
Explosion-proof fixtures meet the requirements of UL Standard 1598, 1598A, 844 and CSA Standard C22.2, No.250, 94.0, 213.0, 137.0, 30.0 regarding electric luminaires for use in Class I,
Div. 1, Groups C & D; Class I, Div. 2, Groups A, B, C, D; Class II, Div. 1,Groups F & G; Class II, Div. 2, Groups F & G; and Class III, Div. 1 & 2. For marine applications, installation must be in accordance with USCG 46 CFR parts 110 through 113.
The majority of explosion proof lights on the market were originally designed for “fixed” installation then modified, re-purposed, or represented as portable. These re-purposed lights are no longer certified and have limited mounting possibilities. Their increased bulkiness prevent them from offering a truly portable experience.
Unit Installation
For high performance and long term reliability, the light should be installed in free air. Carefully
unpack unit and properly inspect for defects before installing. Wear work gloves to prevent dirt and
oil from being transferred to the luminaire.
A: Ceiling Type
1.According to the bracket hole distance, installed two M10 bolts on the roof.
2.Tighten the bracket from two sides to wrench tight.
3.Bolt the universal mounting bracket and tighten the M10 bolts to the field mounting point.
4.Wiring.(Connect supply wires to luminaire wire leads per the wiring diagram using
methods that comply with all applicable codes.)
B: Wall Type
1.According to the bracket hole distance, installed two M10 bolts on the side wall;
2.Tighten the bracket from two sides to wrench tight.
3.Bolt the universal mounting bracket and tighten the M10 bolts to the field mounting point.
4.Wiring.(Connect supply wires to luminaire wire leads per the wiring diagram using
methods that comply with all applicable codes.)
C. Hanging Chain
1.Install a M20 eyebolt or hook on the roof;
2.Tighten the bracket from two sides to wrench tight.
3.Tighten the M10 eyebolt attached to the hanging ring to ensure the hanging ring is securely
connected to the light fixture.
4.Wiring.(Connect supply wires to luminaire wire leads per the wiring diagram using
Div. 1, Groups C & D; Class I, Div. 2, Groups A, B, C, D; Class II, Div. 1,Groups F & G; Class II, Div. 2, Groups F & G; and Class III, Div. 1 & 2. For marine applications, installation must be in accordance with USCG 46 CFR parts 110 through 113.
The majority of explosion proof lights on the market were originally designed for “fixed” installation then modified, re-purposed, or represented as portable. These re-purposed lights are no longer certified and have limited mounting possibilities. Their increased bulkiness prevent them from offering a truly portable experience.
Unit Installation
For high performance and long term reliability, the light should be installed in free air. Carefully
unpack unit and properly inspect for defects before installing. Wear work gloves to prevent dirt and
oil from being transferred to the luminaire.
A: Ceiling Type
1.According to the bracket hole distance, installed two M10 bolts on the roof.
2.Tighten the bracket from two sides to wrench tight.
3.Bolt the universal mounting bracket and tighten the M10 bolts to the field mounting point.
4.Wiring.(Connect supply wires to luminaire wire leads per the wiring diagram using
methods that comply with all applicable codes.)
B: Wall Type
1.According to the bracket hole distance, installed two M10 bolts on the side wall;
2.Tighten the bracket from two sides to wrench tight.
3.Bolt the universal mounting bracket and tighten the M10 bolts to the field mounting point.
4.Wiring.(Connect supply wires to luminaire wire leads per the wiring diagram using
methods that comply with all applicable codes.)
C. Hanging Chain
1.Install a M20 eyebolt or hook on the roof;
2.Tighten the bracket from two sides to wrench tight.
3.Tighten the M10 eyebolt attached to the hanging ring to ensure the hanging ring is securely
connected to the light fixture.
4.Wiring.(Connect supply wires to luminaire wire leads per the wiring diagram using
评论
发表评论